|
|
MITE-R-GAGE is a
simple and economical tool that can be used to measure or layout angles. The tool allows
the professional or do-it-yourselfer to take on difficult jobs involving angular cuts and
fits- with professional results. The insert provided with each tool illustrates the
primary uses and versatility of MITE-R-GAGE. The insert also gives clear simple
instructions for using the tool. After the tool has been used a few times, most people do
not need the instructions. It is an excellent companion tool for miter, table, or radial
arm saws. |
GUARANTEE
MITE-R-GAGE is made of LEXAN™ resin and will not break, crack, or warp under normal
usage.
The dual (full plus half angle)** scale is embedded in the resin and paint filled. It will
not wash or rub off. The black knob ( with one quick twist) allows the tool to be locked
at any desired angle - useful for angle layout or as an adjustable try-square etc.
MITE-R-GAGE is accurate to ¼ of one degree. |
The approximate dimensions of
MITE-R-GAGE are as follows:
- scale diameter 3 1/2 inches
- arm(s) length 10 inches
-
head height 7/8 inches
-
arm width 5/8 inches
-
overall length 11 3/4 inches
-
the approximate weight per tool is 4 ounces
|
Lexan* is a registered trademark of General Electric Co.
** The half angle scale gives the exact angle for miter cuts
|
For your
Appraisal or Software needs,
Please be sure to visit
 
|
|
Copyright © 1997-2010 Nowlin Inc. All rights reserved
Home /
Product
Info. / Applications /
Online
Ordering
Phone: 1-800-376-5128
FAX: 614-478-8325
Nowlin, Inc., EST. 1977
3441 Patriot Blvd.,
Columbus, OH 43219
Designed by:
WebChick.com
|
|